Two-on-One Headrail | Continuous Cord Systems | Arches and Circles
Two-on-One Headrail
3/4" Pleat and Double Cell
Inside Mount
- Min. Mounting Depth:
- Standard Installation
Bracket ................................ 1"
- Min. Mounting Depth, Flush Mount:
- Standard Installation
Bracket .................................3" - Specialty End Mount
Bracket .................................3"
Outside Mount
- Min. Flat Vertical Surface:
- Standard Installation
Bracket ................................ 1"
Ordering Notes
- Follow basic measuring instructions.
- Inside Mounts Specify standard
installation brackets. - Outside Mounts Specify extension
brackets or spacer blocks, if required. - Specify hold down brackets, if desired.
Size Standards
- Min. Width ................................. 12"
- Max. Width ............................... 144"
- Max. Height (most fabrics) ......... 144"
-
- Except: ¾" Pleat
Translucent ............ 192" - Blackout ................ 174"
- Except: ¾" Pleat
- Max. Area (most fabrics) ............ 60ft²
-
- Except: Blackout................ 40ft²
- Double Cell ........... 30ft²
Mounting Requirements
7/16" Pleat
Inside Mount
- Min. Mounting Depth:
- Standard Installation Bracket.................................. 1"
- Min. Mounting Depth, Flush Mount:
- Standard Installation
Bracket ............................. 2 ½" - Specialty End Mount
Bracket ............................. 2 ½"
Outside Mount
- Min. Flat Vertical Surface:
- Standard Installation
Bracket ................................ 1" - Specialty End Mount
Bracket ................................ 1"
Continuous Cord Systems
Heavy Duty Continuous Cord System
Ordering Notes
- Follow basic measuring instructions.
- Specify left or right side cord loop.
- Specify any optional cord loop drops.
- Outside Mounts Specify extension brackets or spacer blocks, if required.
- Specify hold down brackets, if desired.
¾" Pleat Shades and Double Cell with Heavy Duty Continuous Cord System fit rectangular window openings up to 144" wide. Maximum height varies with the width of the shade and with the maximum drop of the fabric being used. The Continuous Cord system is ideal for large shades. A continuous cord loop and clutch assembly work together to make it easy to raise and lower shades up to 150 square feet in area.
Size Standards
- Min. Width ................................. 12"
- Max. Width ............................... 144"
- Max. Height (most fabrics) ......... 144"
-
- Except: ¾" Pleat
Translucent ............ 192" - Blackout ................ 174"
- Except: ¾" Pleat
- Max. Area (most fabrics) .......... 150ft²
-
- Except: Blackout.............. 100ft²
- Double Cell ........... 80ft²
Mounting Requirements
Inside Mount
- Min. Mounting Depth...................... 1"
- Min. Mounting Depth,
Flush Mount ................................. 2"
Outside Mount
- Min. Flat Vertical Surface................ 1"
Hardware Colors
Headrail available in off white only.
Standard Continuous Cord System
Ordering Notes
- Follow basic measuring instructions.
- Specify left or right side cord loop.
- Specify any optional cord loop drops.
- Outside Mounts Specify extension brackets, if required.
- Specify hold down brackets, if desired.
Standard Continuous Cord System is designed for 7/16" pleat fabrics only for rectangular window openings up to 132" wide and up to 96" long.
Like the Heavy Duty Continuous Cord system, the Standard Continuous Cord System shades are operated using a continuous cord loop. A clutch assembly rotates a driveshaft, which turns a roller bar to wind and unwind the lift cords, raising or lowering the shade.
Size Standards
- Min. Width ................................. 18"
- Max. Width ............................... 132"
- Max. Height ................................ 96"
- Max. Area ................................ 88ft²
Mounting Requirements
Inside Mount
- Min. Mounting Depth..................... ¾"
- Min. Mounting Depth,
Flush Mount ............................... 1¼"
Outside Mount
- Min. Flat Vertical Surface............... ¾"
Hardware Colors
Headrail available in off white only.
Exclusions
¾" pleat and Double Cell fabrics are not available.
Arches and Circles
Ordering Notes
- Follow arch and circle measuring instructions.
- Include a template with each shade ordered. See template preparation instructions.
- Specify if an arch or quarter circle will share the headrail with a standard rectangular shade.
- Inside Mounts Specify standard installation brackets, or specialty end mount brackets.
- Outside Mounts Specify standard installation brackets or specialty wall mount brackets. Specify extension brackets or spacer blocks, if required.
- Specify if disc arch covers are desired.
Arches and Circles are available up to 84" wide. Both perfect
and imperfect
arches are available. An arch is perfect if its width equals twice its height.
Arches and quarter circles may share the same headrail with standard rectangular shades. If the shade assembly is inside-mounted, specialty end mount brackets are used. If the shade is outside-mounted, specialty wall mount brackets are required.
To be sure the shape of the shade matches the shape of the window opening, a template must be provided for each ordered arch and circle.
Size Standards
- Min. Width ................................. 12"
- Max Width:
-
- Stationary Arches:
- 7/16" Pleat Translucent ........ 60"
- Blackout ............................. 60"
- Double Cell ......................... 60"
- Circles:
- 7/16" Pleat Translucent ........ 48"
- 3/4" Pleat Translucent .......... 48"
- Blackout ............................. 60"
- Quarter Circles:
- 7/16" Pleat Translucent ........ 30"
- Blackout ............................. 42"
Mounting Requirements
Arches and Quarter Circles
Same as Two-on-One (see above)
Circles
Inside Mount
- Min. Mounting Depth, 7/16" pleat ... 1 1/8"
- Min. Mounting Depth, 3/4" pleat ..... 1 1/2"
Outside Mount
- Min. Flat Vertical Surface............... 1"
Exclusions
Double Cell fabrics available only for perfect
arches. Not available for circles or quarter circles.